High-voltage test pistols
Safe testing with high-voltage
Key-Facts
Safety comes first.
- Safety test pistols up to 10 KV and 12 KV
- Safety test pistols with integrated start button in the handle
- Safety test pistols with integrated start button in the pressure-sensitive test tip
- Safety test pistols in 4-wire-technology
- Different lead lengths
Description
Safe testing with high-voltage.
At manual high-voltage tests the test object is contacted with high-voltage test pistols.
Different HV-test pistols for different test tasks are available.
Safety HV-test pistols allow a safe, manual contacting at single test points.
The test tip is made of almost wear-free lungsten and assures a long lifetime. Furthermore the test tip is protected by an arc-resistant teflon tube.
The start button in the handle is protected against accidental activation.
Applications
High-voltage test with safety test pistols.
Our safety test pistols are available either with or without integrated start button.
The picture shows test pistols without start button. Thus, either the start button at the tester´s front or the foot switch has to be activated to start the test.
Impressions
60204-test at a cabinet
- One-hand operation with release by an operating panel
- Test between pistols and ground
- Inspection of
- PE-resistance with10 A
- Insulation resistance
- High-voltage AC or DC
High-voltage test
- Two test pistols
High-voltage test via adapter
- Adapter to connect the test object´s plug
- Contact pads on the adapter where the test pistols are to be pressed on
High-voltage tests at motors
- Fault-to-frame test between winding and motor housing
High-voltage tester integrated in a mobile caddy
- Perfect for mobile use
- Integrated compartment on the right side of the tester
Technology
Technology at a glance.
High-voltage test probe for testers with 3mA safety current limiting
- Lead length 2 m
- Test voltage AC 1,5 KV
- Test voltage DC 2 KV
High-voltage test pistols with trigger in the handle to extend the test tip
- Lead length 2, 4, 6, 8, 10 m
- Test voltage AC 8 KV
- Test voltage DC 10 KV
- High-voltage is not led through handle
- Test tip diameter only 1,6 mm
High-voltage test pistols with trigger and button in the handle to extend the test tip
- Lead length 2, 4, 6, 10 m
- Test voltage AC 8 KV
- Test voltage DC 10 KV
High-voltage test pistols with trigger to extend the test tip and integrated push button
The test is started by pressing the extended test tip against the test object.
By this, an internal switch is activated in the test pistols . The test is started, as soon as both switches are activated in the pistols .
- Lead length 2, 4, 6 m
- Test voltage AC 8 KV
- Test voltage DC 10 KV
High-voltage test probe with trigger to extend the test tip
- Lead length 2, 6, 10 m
- Test voltage AC 12 KV
- Test voltage DC 15 KV
High-voltage cable with connection plug
- Lead length 2, 4, 6, 8, 10 m
- Test voltage AC 8 KV
- Test voltage DC 10 KV
High-voltage cable with connection plug and alligator clamp
- Lead length 2, 4, 6 m
- Test voltage AC 8 KV
- Test voltage DC 10 KV
Alternatives
For further information please contact our technical sales also contact us by phone